Figure 32
Located on the seat pan underside
1.
Read the
Operator’s Manual
before performing any
maintenance.
4.
Check the hydraulic oil every 25 hours
2.
Check the engine oil every 8 hours
5.
Check the caster wheel tire pressure every 25 hours
3.
Check the drive wheel tire pressure every 25 hours
6.
Lubricate the caster wheel every 25 hours
Premaintenance
Procedures
Raising the Seat
Make sure the motion control levers are locked in the
neutral lock position. Lift the seat forward.
The following components can be accessed by raising
the seat:
•
Service decal
•
Fuses
•
Battery and cables
Lubrication
Greasing the Bearings
Service Interval:
Every 25 hours—Grease all
lubrication points.
Grease Type:
No. 2 General Purpose Lithium Base
Grease
1. Park the machine on a level surface and disengage
the blade control switch.
2. Move the motion control levers to the neutral lock
position, set the parking brake, stop the engine,
remove the key, and wait for all moving parts to stop
before leaving the operating position.
3. Clean the grease fittings (Figure 33 and Figure 32)
with a rag. Make sure to scrape any paint off of the
front of the fitting(s).
28
Содержание 74833
Страница 50: ...Schematics G012083 Wire Diagram Rev B 50...
Страница 51: ...Notes 51...
