Fuel System
Maintenance
Replacing the Fuel Filter
Service Interval:
Every 500 hours/Yearly (whichever
comes first) (more often under dusty,
dirty conditions).
1. Disengage the blade control switch (PTO), move the
motion control levers to the neutral lock position,
and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Allow the machine to cool down.
4. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
5. Squeeze the ends of the hose clamps together and
slide them away from the filter (Figure 41).
G008963
1 2
3
Figure 41
1.
Fuel filter
3.
Fuel line
2.
Hose clamp
6. Remove the filter from the fuel lines.
7. Install a new filter and move the hose clamps close
to the filter (Figure 41).
8. Open the fuel shutoff valve.
Note:
It is important to reinstall the fuel line hoses and
secure with plastic ties the same as they were originally
installed at the factory to keep the fuel line away from
components that could cause fuel line damage.
Electrical System
Maintenance
Servicing the Battery
Service Interval:
Monthly
WARNING
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
DANGER
Battery electrolyte contains sulfuric acid which is a
deadly poison and causes severe burns.
Do not drink electrolyte and avoid contact with
skin, eyes or clothing. Wear safety glasses to shield
your eyes and rubber gloves to protect your hands.
Removing the Battery
WARNING
Battery terminals or metal tools could short against
metal machine components causing sparks. Sparks
can cause the battery gasses to explode, resulting
in personal injury.
•
When removing or installing the battery, do not
allow the battery terminals to touch any metal
parts of the machine.
•
Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
34
Содержание 74833
Страница 50: ...Schematics G012083 Wire Diagram Rev B 50...
Страница 51: ...Notes 51...
