Toro 74833, Руководство оператора

Страница: 45 / 52

brackets, spring, and discharge deflector (Figure 64).
Remove the damaged or worn discharge deflector.
G006036
1
2
3
4
5
Figure 64
1. Deflector assembly 4. Spring
2. Deck brackets 5. Spring installed over the
rod
3. Rod
2. Position the new discharge deflector assembly with
the bracket ends between the welded brackets on the
deck as shown in Figure 64.
3. Install the spring onto the straight end of the rod.
Position the spring on the rod as shown in so the
shorter spring end is coming from under the rod
before the bend and going over the rod as it returns
from the bend.
4. Lift the long end of the spring and place it into the
notch on the deflector assembly bracket (Figure 65).
G006049
1
2
3
4
Figure 65
1. Rod and spring assembly
partially installed 3. Rod, short end, moved
behind mower bracket
2. Long end of the spring
installed into the notch in
the deflector bracket 4. Short end, retained by
mower bracket.
5. Secure the rod and spring assembly by twisting it so
the short end of the rod can be placed behind the
front bracket welded to the deck (Figure 65).
Important:
The grass deflector must be spring
loaded in the down position. Lift the deflector
up to test that it snaps to the full down position.
45