Button
Name
Primary Function
F
LOOR
I
NC
Increases the Floor speed.
P
RESET
1
P
RESET
2
P
RESET
3
Three separate preset values may be stored for both floor and option speeds.
S
TORE
Used in conjunction with the P
RESET
button to store or establish a preset
memory.
O
PTION
S
TART
Provides functional control of the rear option including on/off and displaying
the option speed.
O
PTION
S
TOP
Stops the option.
O
PTION
D
EC
Decreases the option speed.
O
PTION
I
NC
Increases the option speed.
A
LL
S
TOP
Stops both floor and option.
Turning On the Handheld Remote
Press the O
N
/O
FF
button on the remote and wait for the it to
find the base. Ensure that there are no buttons being pressed
on the hand held while it is performing its start up routine.
Manual Override
Should the remote ever be lost, damaged or fail, the machine
functions and operation are still possible in order to complete
tasks or continue work.
The override access is on the driver side of the hydraulic
system (
).
Figure 43
1.
Floor speed
2.
Spinner speed
•
To adjust the floor speed (
), turn the knob
clockwise. Maximum floor speed is used in the
Color-Coded Operating System so this adjustment can be
made while no hydraulic flow is present. This is most
relevant when you have a hopper full of sand.
24
