7.
Lower the jack stand(s) as follows:
•
On tow-behind chassis, turn the jack stand 90
degrees (clockwise) to the down position to
support the machine
•
On Truckster direct connect chassis, move the jack
stands to the front of the machine and turn them
90 degrees until the bottom of both jack stands
points to the ground.
8.
Lift the machine with the jack stand(s) until the weight
is off the tow-vehicle draw bar. Pull out the hitch pin.
9.
Ensure that there is no further connection between the
machine and the tow vehicle.
Operating the Hydraulic
Controls and Options
Remote Control System
The remote control system consists of a handheld remote, a
+12 to +14.4 VDC Base Unit, and a wiring harness.
Handheld Remote
Figure 42
1.
LCD display
10.
Floor Start
2.
Remote status LED
11.
Floor Stop
3.
All Start: Starts Floor and
Option
12.
Decrease Floor Speed
4.
On/Off
13.
Increase Floor Speed
5.
Store: Saves Preset
Settings
14.
Option Start
6.
Preset 1
15.
Option Stop
7.
Preset 2
16.
Increase Option Speed
8.
Preset 3
17.
Decrease Option Speed
9.
All Stop: Stops all
functions
Button Functions
Button
Name
Primary Function
O
N
/O
FF
Power the remote on and off.
A
LL
S
TART
Provides functional control on both the Floor and Option including on/off and
displaying the speed.
F
LOOR
S
TART
Provides functional control of the hopper conveyor floor belt including on/off
and displaying the floor speed.
F
LOOR
S
TOP
Stops the Floor.
F
LOOR
D
EC
Decreases the Floor speed.
23
