Toro 34231, Руководство оператора

Страница: 44 / 84

Cleaning the Sprayer Nozzles
Service Interval: After each use
1. Rotate the nozzle cap 90° counterclockwise and
remove the cap from the nozzle body (
Figure
53 ).
g311414
Figure 53
1. Nozzle body 3. Sprayer tip
2. Strainer 4. Nozzle cap
2. Remove the sprayer tip and strainer from the
nozzle body (
Figure 53 ).
Note:
Replace any worn or damaged nozzle
parts.
3. Use a soft-bristle brush and clean water to clean
the nozzle tip and strainer.
4. Assemble the strainer into the nozzle body
(
Figure 53 ).
5. Assemble the sprayer tip into the nozzle cap
(
Figure 53 ).
6. Install the tip and cap onto the nozzle body
(
Figure 53 ).
Note:
Use the slot to rotate the atomizer ( Figure
54 ) of the sprayer tip forward (in-line with the
flow-regulator case of the nozzle body).
g311417
Figure 54
1. Flow-regulator case 3. Atomizer slot (incorrect)
2. Atomizer slot
(aligned—correct)
7. Rotate the nozzle cap 90° clockwise ( Figure 53 ).
8. Repeat steps 1 through 7 for the other spray
nozzles.
44