Toro 34231, Руководство оператора

Страница: 14 / 84

Caster Wheel-Lock Pedal
•
Press and hold the caster wheel-lock pedal ( Figure
6 ) to lock the caster wheels in the straight position.
•
Release the caster wheel-lock pedal to unlock the
caster wheels, and allow the machine to freely
turn.
g311617
Figure 6
1. Brake foot pedal (parking
brake) 2. Caster-lock pedal
Parking Brakes
•
Push the left and right brake foot-pedals ( Figure 6 )
down to engage the brakes.
•
Push the left and right brake foot-pedals up to
disengage the parking brakes.
Engine Controls
g311614
Figure 7
1. Throttle control 4. Operator-presence
switch/lanyard
2. Choke control 5. Ignition switch
3. Hour meter
Ignition Switch
The ignition switch is located at the left side of the
control console (
Figure 7 ).
Use the ignition switch to start and run, or shut off the
engine. The ignition switch has 3 positions: S
TOP
,
R
UN
and S
TART
.
Note:
You must engage the parking brake to start
the engine.
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
LOW
to F
AST
position ( Figure 7 ).
Choke Control
Use the choke control to start a cold engine.
Operator-Presence Switch/Lanyard
Pulling the lanyard from the operator-presence switch
(
Figure 7 ) shuts off the engine.
Hour Meter
The hour meter displays the total hours of engine
operation. The hour meter (
Figure 7 ) starts to function
whenever you rotate the key switch to the O
N
position
or if the engine is running.
Spreader Controls
g311623
Figure 8
1. Impeller-speed control
3. Diffuser control
2. Deflector control 4. Hopper-door control
Impeller-Speed Control
Use the impeller-speed control ( Figure 8 ) to set the
speed of the hydraulic motor for the spreader.
Hopper-Door Control
The hopper-door control ( Figure 8 ) opens and closes
the door inside the base of the hopper
14