Toro 34231, Руководство оператора

Страница: 29 / 84

Filling the Spreader Hopper
Maximum hopper weight capacity: 54 kg (120 lb)
1. Drive the machine to the work site.
2. Move the machine to a level surface, move
motion-control lever to the N
EUTRAL
position,
shut off the engine, wait for all moving parts to
stop, remove key, and engage parking brake.
3. Ensure that the hopper-door control is in the fully
forward (closed) position; refer to
Adjusting the
Hopper-Door Control (page 25) .
4. Use the Spreading Charts (page 30) to
determine the setting for the drop-rate cam
(
Figure 23 ).
Note:
If the setting is not listed for the type of
material that you are using, set the cam to the
setting with a lower value then adjust as needed.
g312531
Figure 23
1. Cover 3. Drop-rate cam
2. Hopper
5. Remove the cover from the hopper, add the
material that you are spreading, and install the
cover onto the hopper (
Figure 23 ).
Note:
Do not overload the hopper; the
maximum weight capacity of the hopper is 54
kg (120 lb).
Note:
You may place extra bags of granular
material in the cargo boxes behind the spray
tanks.
29