Toro 34231, Руководство оператора

Страница: 54 / 84

Checking the Engine-Oil
Level
Service Interval: Before each use or daily
Important:
Do not operate the engine with the oil
level below the Low (or Add) mark on the dipstick,
or over the Full mark.
1. Move the machine to a level surface.
2. Prepare the machine for maintenance; refer to
Preparing the Machine (page 49) .
3. Rotate open the right spray tank and allow the
engine to cool;
Opening the Tanks (page 50) .
4. Remove the dipstick from the engine and wipe
the dipstick with a clean rag (
Figure 70 ).
g312874
Figure 70
1. Dipstick and filler neck
5. Insert the dipstick into the engine , and tighten
the dipstick
Figure 71 .
g312872
Figure 71
1. Maximum oil level
(dipstick) 3. Filler neck
2. Minimum oil level (dipstick)
6. Remove the dipstick from the filer neck, and
check oil level on the dipstick (
Figure 71 ).
Note:
The engine oil level must cover the
hatch-marked area of the dipstick ( Figure 71 ).
7. If the oil level is low, wipe off the area around the
filler neck and add the specified oil (
Figure 72 )
until the oil level is between the hatch marked
areas on the dipstick.
Important:
Do not overfill the engine with
oil.
g312937
Figure 72
8. Hand tighten the dipstick into the filler neck
(
Figure 70 ).
9. Close and secure the right spray tank; refer to
Closing the Tanks (page 51) .
54