
Note:
Ensure that the turn-signal lens on the
headlight is positioned toward the outside of the
traction unit.
g029778
Figure 7
Right headlight assembly shown
1.
Right headlight bracket
4.
Headlight arm
2.
Articulated-joint shell
5.
Locknut (10 mm)
3.
Articulated joint
3.
Tighten the locknut to firmly hold the headlight
assembly to the headlight bracket.
Note:
Do not overtighten the locknut.
Installing the Headlight Bracket to
a Cab Model
1.
Install a bent-plate bracket onto each of the
upper corners of the lower front panel of the cab
with the existing screws as shown in
g034337
Figure 8
1.
Bolt (5/16 x 1-5/8 inches)
5.
Rubber hanger
2.
Washer
6.
Flange nut (5/16 inch)
3.
Bent-plate bracket
7.
Screw (existing)
4.
Spacer
2.
Loosely install a rubber hanger to each
bent-plate bracket with a bolt (5/16 x 1-5/8 inch),
2 washers (3/8 inch), a spacer, and a flange nut
(5/16 inch) as shown in
.
3.
Loosely install the left and right headlight
brackets to the front of the roller-support tube
with 6 bolts (3/8 x 2-1/2 inches) and flange nuts
(3/8 inch). Position the brackets as shown in
Note:
Ensure that the holes in the bent-plate
brackets align with the holes in the rubber
hangers.
6
Содержание 30667
Страница 20: ......