
Note:
The left and right light brackets are
different. Ensure that you use the correct mount.
g023194
Figure 19
1.
Left light bracket
3.
Rear lamp
2.
Right light bracket
3.
Mount the rear lamp to light bracket with the
bolts and nuts included with the light (
).
Note:
Ensure that the light is positioned so that
the plug is through the hole in the light bracket
and the amber end is toward the outside of the
traction unit.
4.
Remove the 2 rear bolts and 2 washers from the
right frame rail (
g023195
Figure 20
1.
Bolts and washers
5.
Secure the right light bracket to the frame with 2
bolts (5/8 x 3 inches) and 2 flat washers (
10
Installing the License-Plate
Bracket
Parts needed for this procedure:
1
Plate light
1
Plate bracket
2
Screw (#10 x 5/8 inch)
2
Locknut (#10)
2
Self-tapping screw (5/16 x 1/2 inch)
Procedure
1.
Secure the plate light to the license-plate bracket
with 2 screws (#10 x 5/8 inch) and 2 locknuts
(
).
Note:
Do not overtighten the screws. Ensure
that the lens points downward and the wires are
inserted through the hole in the license-plate
bracket.
g023197
Figure 21
1.
Locknut (#10)
4.
Screw (#10 x 5/8 inch)
2.
License-plate bracket
5.
Self-tapping screw (5/16 x
1/2 inch)
3.
Plate light
2.
Mount the license-plate bracket to the rear
bumper with 2 self-tapping screws (5/16 x 1/2
inch) as shown in
Note:
Position the license-plate bracket as
shown in
.
12
Содержание 30667
Страница 20: ......