
2
Drilling the Mounting Holes
No Parts Required
Drilling the Holes for the
Headlights and the Wire Harness
1.
Remove the nuts from the 2 carriage bolts
securing the headlights to the traction-unit frame
(
).
2.
Remove the 2 self-tapping bolts securing the top
of the platform shroud to the frame (
).
3.
Unplug the headlight connectors and remove
the platform shroud from the frame (
).
g034758
Figure 1
1.
Platform shroud
4.
Self-tapping bolt (2)
2.
Headlight assembly
(halogen shown)
5.
Headlight connector
3.
Carriage bolt (2)
6.
Drill a 38 mm (1-1/2 inch)
hole here.
4.
Drill a 38 mm (1-1/2 inch) hole in the platform
shroud in the location shown in
.
5.
Using the dimensions in
, locate and
drill 6 holes (1.0 cm) through both walls of the
roller-support tube.
g029586
Figure 2
1.
6.4 cm (2-1/2 inches)
4.
1.0 cm (13/32 inch) diameter
2.
8.9 cm (3-1/2 inches)
5.
1.9 cm (3/4 inch)
3.
14.0 cm (5-1/2 inches)
3
Содержание 30667
Страница 20: ......