Toro 07161, Руководство по установке, Страница: 25 / 32

g237675
Figure 55
1. Front frame channel 3. Hole (Ball-picker mount)
2. Right side of the machine
3. Remove the 8 flange bolts (3/8 x 1 inch), 8
flange locknuts (3/8 inch), bottom bracket, and
ball-picker mount from the machine (
Figure 52 ).
4. Centerpunch the 6 marks that you made on the
center-channel plate in step
2 .
5. Drill 6 holes 10 mm (3/8 inch) in the
center-channel plate at the centerpunch marks
that you made in step
4 .
g237751
Figure 56
1. Front frame channel 2. Drill bit 10 mm (3/8 inch)
Assembling the Ball-Picker Mount
to the Machine
1. Assemble the ball-picker mount and the
bottom bracket to the front frame channel and
center-channel plate (
Figure 57 , Figure 58 , and
Figure 59 ) with 14 flange bolts (3/8 x 1 inch) and
14 flange locknuts (3/8 inch).
g237727
Figure 57
1. Flange bolt (3/8 x 1 inch) 3. Flange locknut (3/8 inch)
2. Ball-picker mount 4. Bottom bracket
g237880
Figure 58
1. Flange bolt (3/8 x 1 inch) 3. Bottom bracket
2. Ball-picker mount 4. Flange locknut (3/8 inch)
25