Toro 07161, Руководство по установке, Страница: 17 / 32

8. Loosely install the crosslink tubes to the rear
mount brackets and rear corner gussets using 4
carriage bolts (5/16 x 1-3/4 inches) and 4 flange
nuts (5/16 inch) as shown in
Figure 35 .
g231407
Figure 35
1. Carriage bolt (5/16 x 1-3/4
inches) 5. Rear mount bracket
2. Front mount bracket
6. Crosslink tube
3. Corner gusset 7. Windshield support
4. Flange nut (5/16 inch)
9. Loosely install the front mount brackets and front
corner gussets to the crosslink tubes and the
windshield supports using 8 carriage bolts (5/16
x 1-3/4 inches) and 8 flange nuts (5/16 inch) as
shown in
Figure 35 .
10. Loosely install the front crosslink to the front
mount brackets and corner gussets using 4
carriage bolts (5/16 x 1-3/4 inches) and 4 flange
nuts (5/16 inch) as shown in
Figure 36 .
g036759
Figure 36
1. Carriage bolt (5/16 x 1-3/4
inches) 3. Front crosslink
2. Flange nut (5/16 inch)
11. Use 2 hex-head flange bolts (1/4 x 1-1/2 inches)
and 2 nuts (1/4 inch) to secure the front support
to the front crosslink (
Figure 37 ).
g214868
Figure 37
1. Front crosslink 3. Nut (1/4 inch)
2. Front support 4. Hex-head flange bolt (1/4
x 1-1/2 inches)
12. Tighten all loose fasteners.
17