Toro 03674, Руководство оператора

Страница: 28 / 76

Engine Run Indicates the inputs, qualifiers,
and outputs for starting the
engine.
Backlap Indicates the inputs, qualifiers
and outputs for operating the
backlap function.
Settings
Menu Item Description
Units Controls the units used on the
InfoCenter. The menu choices
are English or Metric.
Language Controls the language used
on the InfoCenter*.
LCD Backlight Controls the brightness of the
LCD display.
LCD Contrast Controls the contrast of the
LCD display.
Front Backlap Reel Speed Controls the speed of the front
reels in backlap mode.
Rear Backlap Reel Speed Controls the speed of the rear
reels in backlap mode.
Protected Menus Allows the
superintendent/mechanic
to access protected menus by
inputting a passcode.
Auto Idle Controls the amount of time
allowed before returning the
engine to low idle when the
machine is stationary.
Blade Count Controls the number of blades
on the reel for reel speed.
Mow Speed Controls the ground speed for
determining the reel speed.
Height of cut (HOC) Controls the height of cut
(HOC) for determining the reel
speed.
F Reel RPM Displays the calculated reel
speed position for the front
reels. The reels can also be
manually adjusted.
R Reel RPM Displays the calculated reel
speed position for the rear
reels. The reels can also be
manually adjusted.
Economy Mode When activated, the Economy
Mode lowers the engine
speed while mowing to reduce
noise and fuel consumption.
The reel speed does not
change, but the mow speed is
decreased if the mow stop is
not adjusted accordingly.
*Only "operator-faced" text is translated. Faults,
Service, and Diagnostics screens are "service-faced.”
Titles are in the selected language, but menu items
are in English.
About
Menu Item Description
Model Lists the model number of the
machine.
SN Lists the serial number of the
machine.
Machine Controller Revision Lists the software revision of
the master controller.
CU 1
CU 2
CU 3
CU 4
CU 5 Lists the software revision of
each cutting unit.
Generator Lists the software revision of
the motor/generator.
InfoCenter Revision Lists the software revision of
the InfoCenter.
CAN Bus
Lists the machine
communication bus status.
Protected Menus
There are 2 additional display screens and 7 operating
configuration settings that are adjustable within the
Settings Menu of the InfoCenter: Auto Idle, Blade
Count, Mow Speed, Height of Cut (HOC), F Reel
RPM, R Reel RPM, and Economy Mode. These
settings can be locked by using the Protected Menu.
Note:
At the time of delivery, the initial password
code is programmed by your distributor.
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1. From the M
AIN
M
ENU
, use the center button to
scroll down to the S
ETTINGS
M
ENU
and press the
right button ( Figure 47 ).
g028523
Figure 47
28