5
Operator Training and Safe Practices
Precautions and Safety should always be followed when Installing and Operating this lift.
READ AND UNDERSTAND ALL SAFETY INSTRUCTIONS
AND DECALS INCLUDED ON AND WITH THE LIFT.
READ AND FOLLOW ALL SAFETY WARNING PROCEDURES
IN THIS MANUAL BEFORE OPERATING LIFT.
·
ONLY TRAINED and AUTHORIZED PERSONNEL should operate the lift. Do not allow
customers or unauthorized personnel to operate the lift or remain in the lift area.
·
Review regularly the safety rules and guidelines with personnel. All non-trained personnel
should be kept away from work area. Never let non-trained personnel come in contact
with, or operate lift.
·
Understand the vehicle lift operating controls before use.
·
Do not leave the operational controls while the lift is still in motion.
·
Do not stand in front of the vehicle or in the bay when vehicle is being loaded or driven
into position.
·
Do not attempt to work on the vehicle or go near vehicle when lift is being raised or
lowered.
·
Be aware. Watch what you are doing. Use common sense.
·
Stay clear of lift when raising or lowering vehicle.
·
Clear the area if vehicle is in danger of falling
·
Keep hands and feet clear. Remove hands and feet from any moving parts. Keep feet clear
of lift when lowering to avoid bodily harm or any pinch points.
·
Do not raise or lower the vehicle unless tools, materials and people are clear. Clean up
grease and oil spills immediately.
When the lift is being lowered, make sure everyone is
standing at least six feet away. Be sure there are no jacks, tools, equipment, left under the lift
before lowering. Always lower the vehicle down when
·
Inspect for damaged parts. Do not use lift if any components are broken or damaged.
Check all moving parts for any type of damage that may affect misalignment or operation
of lift.
·
INSPECT THE LIFT DAILY
. Do not operate if potential problems have been identified or lift
malfunctions. Do not operate if lift has damaged or broken components. Never walk or work
under the lift unless all safety locks are completely engaged. A daily inspection of the lift
should be completed prior to its any use. Safety mechanisms, operating controls, lifting arms,
ramps and any other critical parts should be inspected prior to using the lift.
·
ALWAYS KNOW YOUR LOAD LIMIT.
Use caution so that you do not overload the lift. It
is important that you know the load limit. To check the rated capacity, decals are located
on one of the lift columns or contact the manufacturer. The hydraulic system on this lift is not
designed to be a load holding device. Mechanical safety locks must be engaged before
proceeding under the lift, with vehicle servicing, or system maintenance. Never override
operating controls. This is unsafe and will void the warranty, before driving a vehicle between
the columns, position all arms to insure unobstructed entry. Do not hit or run over arms as this
could damage the lift and/or vehicle.
·
Always make sure you have proper overhead clearance
Содержание QJY240C
