Topcon Luminance Colorimeter BM-5AC, Инструкция по эксплуатации

Страница: 68 / 103

3. Various Settings
66
3.2.9 Setting the Measurement Mode
The measurement mode is selected from the chromaticity measurement mode, the luminance
measurement mode, and the analog response observation mode.
Display method
☞
"3.1.2 Displaying Data/Setting Items"
Selecting analog observation
☞
"3.2.11 Selecting the Analog Output Response Speed"
CHROMATICITY
：
Chromaticity measurement
LUMINANCE ONLY
：
Luminance measurement
LUMI-ANA USE
：
Fixed filter (for analog response observation)
The following describes the procedure for changing the maintenance recommended message
setting.
1
Press the [CHANGE] button.
2
Press the [ROTATION] button and select the setting.
Each press switches the display as follows:
CHROMATICITY → LUMINANCE ONLY → LUMI-ANA USE ……
3
After you have selected the setting, press the [ENTER] button.
･
When luminance measurement (LUMINANCE ONLY) is selected, measurement is
performed only on the tristimulus values set at "selecting the filter for the tristimulus
value fixed mode" in the function mode. During this measurement, offset measurement
is performed each time, and values obtained after subtraction of offset values are
displayed.
･
When fixed filter (LUMI-ANA USE) is selected, measurement is fixed at the filter of the
tristimulus values set at "selecting the filter for the tristimulus value fixed mode" in the
function mode. Offset measurement is not performed when this mode is selected. Use
this mode when performing analog observation using the analog output connector.
☞
"3.2.10 Selecting Filters in the Tristimulus Value Fixed Mode"
Memo
* R S C H R O M A L / R L U M I C H ) *
B A U D X 2 A T R A N G E 0 3 . 3 3 0 0
L E N G C H R O M A T I C I T Y O D D *
S T O P Z B I T R A N G E S 3 P A G E 2