Topcon Luminance Colorimeter BM-5AC, Инструкция по эксплуатации

Страница: 15 / 103

1. Before Use
13
MODE switch
Switches the color coordinate system displayed on the display.
When
this switch is pressed with measurement stopped
(MEAS./HOLD switch set to HOLD), the color coordinate system
displayed on the display is switched in the following order:
xy/L → u'v'/L → XYZ → Tc/duv/L
This switch is set to the xy/L mode when the power is turned ON.
Functions used for the function mode
Name Function
FUNCTION switch
This button is used to enter and return from the function mode.
To enter the function mode, hold down this switch for about 2
seconds. Pressing this switch again returns the mode to the
measurement mode.
ENTER switch
This button is used to change the display page and to store data to
memory after entering values.
CHANGE switch
This switch is used to change settings.
When this switch is pressed, the cursor flashes. Enter the new data
in this state.
ROTATION switch
This switch is used to select parameters. Each press of this switch
successively displays selection candidates. The displayed content
differs according to the parameter type.
Example:
･
→0→1→2→ ……… →8→9→
＋
→
－
→
Ｅ
→
･
→
……… 2400→4800→9600→19200→38400→2400→
……… EVEN→ODD→NONE→EVEN→ ………
SHIFT switch
This switch is used to move the entry digit when entering numerical
values for multiple digits.
The entry digit moves from the highest order digit to the lowest order
digit.