Topcon Luminance Colorimeter BM-5AC, Инструкция по эксплуатации

Страница: 34 / 103

2.Measurement Operation
32
14
Specify a number to write the data for the BM-5AC to be corrected. Select a number
containing the data of the reference instrument, and press the [CHANGE] button.
・
If the data "REF" of the reference instrument is not entered at the number to write the
data to, measurement cannot be performed.
15
The [*DIRECT-CONN FACTOR*] screen is displayed. Select "MEASURE FACTOR" ("*" is
displayed) and press the [ENTER] button.
16
"MEASURING" is displayed on the display, and measurement is started by the instrument to
be corrected. After measurement ends, the correction factor is calculated, and the following
screen is displayed.
17
To enable the calculated correction factor, press the [ENTER] button twice. [*FACTOR
NUMBER*] is displayed.
18
Press the [CHANGE] switch. The following screen is displayed.
19
Press the [ROTATION] switch to move the selection cursor "*" to "DISP&SET".
Memo
K 1 1 K X = 9 . 3 4 3 E - 0 1
K 1 1 K Y = 9 . 5 8 9 E - 0 1
K 1 1 K Z = 9 . 3 9 6 E - 0 1
K 1 1 R = N E X T S = P A G E
K 1 1
N O D A T A
R = N E X T S = P A G E
* F A C T O R N U M B E R *
* S E T F A C T O R O F F
S E T F A C T O R
S E T F A D I S P & S E T
S E T F A O F F
S E T F * B A C K
S E T F A C T O R
S E T F * D I S P & S E T
S E T F A O F F
S E T F * B A C K
* D I R E C T - C O N N F A C T O R *
* M E A S U R E F A C T O R
* E X I T
A L L F A C T O R C L E A R