Topcon Luminance Colorimeter BM-5AC, Инструкция по эксплуатации

Страница: 57 / 103

3. Various Settings
55
3.2.4.3 Checking/Setting Correction Factors
The values of the currently registered correction factors are displayed. If there are no correction
factors registered, "NO DATA" is displayed. "SET" is displayed underneath the number of the
correction factor currently being used.
When no correction factors are registered
When correction factors are registered
When use of correction factors is selected
Press the [CHANGE] switch sets (cancels) correction factors.
The contents of this screen are as follows:
K01
Correction factor number Up to 10 (K01 to K10) correction factors can be
registered.
NO DATA This is displayed when no correction factors are registered.
KX=
･･･
, KY=
･･･
, KZ=
･･･
Correction factor for tristimulus values
C=SET [CHANGE] switch
＝
SET
Sets the displayed correction factor as the correction factor to be used.
When the correction factor is set, "SET" is displayed underneath the correction
factor number
R=NEXT [ROTATION] switch
＝
NEXT
Displays the correction factor for the next number
S=PAGE [SHIFT] switch
＝
PAGE
Each press switches the display as follows:
Reference data → Sample data → Correction factor data → Reference data
→
･ ･ ･
F K 0 1 T D K X = C 1 . 0 0 5 E + 0 0 *
P l K X = R N O = D A T A 0 2 E + 0 0 *
T * K Y = F K Z = 0 9 . 9 5 2 E - 0 1 *
p L K Z = C R = N E X T + S = P A G E 2
F K 0 1 T D K X = C 1 . 0 0 0 E + 0 0 *
P S E T = R K Y = 0 1 . 0 0 0 E + 0 0 *
T * K Y = F K Z = 0 1 . 0 0 0 E + 0 0 *
C = S E T C R = N E X T + S = P A G E 2
F K 0 1 T D K X = C 1 . 0 0 0 E + 0 0 *
P S E T = R K Y = 0 1 . 0 0 0 E + 0 0 *
T * K Y = F K Z = 0 1 . 0 0 0 E + 0 0 *
C = S E T C R = N E X T + S = P A G E 2