Topcon ISOBUS Artemis, Руководство по эксплуатации

Страница: 18 / 28

ISOBUS ARTEMIS - SEED DRILL CONTROLLER
16
4. Blockage Monitoring (optional)
Blockage monitoring is an optional feature. When enabled, this screen page appears after the ‘Totals’ screen page.
In the instance of a dual-product setup, select,
to view the sensor status for seed,
to view the sensor status for fertiliser.
The sensors are identified by the row number being monitored.
NOTE: On a dual-metering setup (e.g. Seed Left / Seed Right), when a
channel is switched off, the sensor indicators will turn red, but there
will not be an alarm.
UK859-230.PNG
4.1 Blockage sensor status and alarms
NOTE: Lifting the drill out of work cancels all alarms.
Indication Status
GREEN
The sensor is operating normally. The required seed flow is detected through the
sensor.
RED
Sensor blocked, either at the coulter or at the distribution head. The alarm message
“ Seed Sensor [xx] Row [xx] Blocked ” or “ Fert Sensor [xx] Row [xx] Blocked” will
appear.
Remove the blockage.
Note: The Sensor No. relates to its position on the distribution head. The Row No.
that the sensor is monitoring may not necessarily be the same as the Sensor No.
ORANGE (FLASHING) The sensor is detected on the CAN bus, however there is a break in communication
with an adjacent sensor.
The alarm message “ Seed Communication Error ” or “ Fert Communication Error ” will
appear.
Check the sensor connectors.
BLACK A sensor is not being detected on the CANbus, and is breaking communication with
the adjacent sensors.
The alarm message “ Seed Communication Error ” or “ Fert Communication Error ” will
appear
Check the sensor connectors, otherwise the sensor may be faulty and need to be
replaced.
Note: A replacement sensor must be configured with the same ID No.