Topcon HiPer II, Руководство оператора

Страница: 67 / 140

Configuring the Receiver
P/N 7010-0982
3-11
•
Anti-jamming
– if available for the connected receiver,
enables suppression of narrow-band interference for GPS,
GLONASS, L1, L2 signals, for auto-detected or manually
selected bands affected by interference.
•
C/A code multipath reduction
– when selected, enables the
use of a special signal processing technique for reduction of
C/A code phase multipath.
•
C/A carrier phase multipath reduction
– when selected,
enables the use of a special signal processing technique for
reduction of C/A carrier phase multipath.
•
Cinderella
– when selected, enables the Cinderella option
which sets all receiver options to their maximum allowable
values for 24 hours every other Tuesday at GPS midnight.
•
Static Co-Op tracking
– when selected, allows only the static
receiver to use satellites with lower signal-to-noise ratios.
Use only if the receiver’s antenna remains completely
stationary throughout the survey. Any movement may result
in losing the satellite lock.
Figure 3-12. Configure Advanced Parameters
6. For the Base receiver, click the
Auto Seed
icon, and set the
following parameters (Figure 3-13 on page 3-12), then click
OK
.
•
Enable Auto Seed
(not recommended for most survey users)
:
when selected, enables the Auto-Seed functionality for the
HiPerII_OM.book Page 11 Wednesday, December 15, 2010 9:07 AM