Topcon HiPer II, Руководство оператора

Страница: 48 / 140

Pre-survey Preparation
HiPer II Operator’s Manual
2-4
Establishing a Serial Cable
Connection
To establish a connection to a receiver, take the following steps:
1. Press the
power
buttons on the receiver to turn it on.
2. Using the provided serial cable (Table 1-2 on page 1-27), connect
the serial port of the computer (usually COM1) to the receiver’s
serial port.
3. Run TRU.
4. Click
Device Application mode
and select
Receiver
Managing
mode.
5. Click
Device Connect
. The
Connection Parameters
dialog box
displays. To establish a connection to the receiver, press the
Connect
button. When detecting the receiver, the
Detecting
Receiver
dialog box displays.
Figure 2-2. Stages for Connecting the Receiver via Serial Cable
6. To close the serial connection to the receiver, click
Device Disconnect
:
HiPerII_OM.book Page 4 Wednesday, December 15, 2010 9:07 AM