Topcon HiPer II, Руководство оператора

Страница: 69 / 140

Configuring the Receiver
P/N 7010-0982
3-13
•
Positioning Mode
– For post-processed surveys, select
Standalone; for RTK surveys, select RTK float or RTK fixed.
•
Enable Solutions
– Select solutions used in position
computation.
– Standalone – where the receiver computes 3D coordinates in
autonomous mode without using differential corrections.
– Code differential – where the Rover receiver computes the
current relative coordinate in differential mode using only
pseudo ranges.
– RTK float – where the Rover receiver computes the current
relative coordinates in differential mode using both pseudo
ranges and phases; however, with a float solution, the phase
ambiguity is not a fixed integer number and the “float”
estimate is used instead.
– RTK fixed – where the Rover receiver computes current
relative coordinates, with carrier phase ambiguity fixing in
differential mode.
Figure 3-14. Rover Configuration
8. For RTK surveys, click the
Ports
icon and set the required port
parameters for the serial port, then click
OK
(Figure 3-15 on
page 3-14).
HiPerII_OM.book Page 13 Wednesday, December 15, 2010 9:07 AM