Topcon HiPer II, Руководство оператора

Страница: 94 / 140

Troubleshooting
HiPer II Operator’s Manual
6-4
Receiver Problems
The following are some of the most commonly encountered receiver
problems.
The receiver cannot establish a connection to a computer or
external controller
Cable specific problems:
D
The cable is not properly plugged in.
• Check that the cable connector is attached to the correct
receiver port.
• Unplug the cable, then securely and properly reconnect it to
the receiver.
• See “HiPer II Features” on page 1-9 and “Power
Connector” on page A-12 for information on the receiver’s
connectors.
D
The cable is damaged.
Use an undamaged cable. Contact a Dealer to replace the
cable.
Generic problems:
D
The receiver port used for connection is not in Command mode.
1. Connect the receiver and a computer using a free port
(see “Connecting to the Receiver using TRU” on page 2-
3) and start TRU.
2. Click
Configuration Receiver Ports
.
3. Change the
Input
for the port used for connection to
“Command”.
The receiver does not lock on to satellites for a long period of
time
D
The receiver stores an old almanac.
Update the almanac. See “Collecting Almanacs and
Ephemerides” on page 2-7 for details.
HiPerII_OM.book Page 4 Wednesday, December 15, 2010 9:07 AM