Topcon HiPer II, Руководство оператора

Страница: 92 / 140

Troubleshooting
HiPer II Operator’s Manual
6-2
Troubleshooting Quick List
For receiver power issues:
If “The receiver does not power up,” see page 6-3.
For receiver issues:
If “The receiver does not lock on to satellites for a long period of
time,” see page 6-4.
If “The receiver tracks too few satellites,” see page 6-5.
If “The receiver cannot obtain Code Differential and/or RTK
solutions,” see page 6-5.
If “The receiver does not start logging data,” see page 6-7.
For Bluetooth connection issues:
If “TRU error message: Can’t find receiver,” see page 6-8.
If “TRU error message: Open COM# port failed: Access is
denied,” see page 6-9.
If “TRU error message: Open COM# port failed: Access is
denied,” see page 6-9.
If “After searching for available devices, none are discovered,”
see page 6-9.
If “Can see the icon for the receiver’s Bluetooth module on the
computer screen, but cannot connect to it,” see page 6-10.
For modem issues:
If “TRU cannot connect to the receiver,” see page 6-10.
Powering Problems
All receivers are preset in the factory to “Auto mode” for the battery.
To check these settings, use the following procedure:
1. Connect the receiver and a computer and run TRU (see
“Connecting to the Receiver using TRU” on page 2-3).
2. Once connected, click
Configuration Receiver
.
HiPerII_OM.book Page 2 Wednesday, December 15, 2010 9:07 AM