Topcon GPT-8000 Series, Инструкция по эксплуатации

Страница: 8 / 145

FOREWORD
6
•
Laser Plummet Model
GPT-8000A/8000 series Laser plummet model use a visible laser beam to perform the plumb laser
function. The GPT-8000A/8000 series Laser plummet type products are manufactured and sold in
accordance with "Radiation Safety of Laser Products, Equipment Classification, Requirements and
User`s Guide" (IEC Publication 60825-1) or "Performance Standards for Light-Emitting Products"
(FDA/BRH 21 CFR 1040) regarding the safety standard for laser products.
As per these standards, the GPT-8000A/8000 series Laser plummet type is classified as "Class II (2)
Laser Products".
Since Laser radiation is emitted from the GPT-8000A/8000 series Laser plummet type instruments,
please refer to the "Laser Safety" bulletin which accompanies the instrument in the United States as
well as the "Safety Standard for Users" that is mentioned in the instruction manual.
In the case of any technical failure, do not disassemble the instrument. Contact either TOPCON or
your authorized TOPCON dealer.
Labels
The following labels are found on the instruments which describe the GPT-8000A/8000 series
Laser plummet type: Precautions and safety information about the laser beam.
If, at any time, any of these labels are damaged and become illegible, please replace these
important labels. Please the new labels in exactly the same position as the original labels.
Replacement labels can be obtained from Topcon or your authorized Topcon dealer.
Beam aperture
Warning Label
Aperture Label
GPT-8000A/8000 series
Laser Plummet type
Explanatory Label
CLASS II LASER PRODUCT
WAVE LENGTH 633nm
1mW MAXIMUM OUTPUT
LASER RADIATION-DO NOT
STARE INTO BEAM
C A U T I O N
CLASS 2 LASER PRODUCT
DO NOT STARE INTO BEAM
LASER RADIATION
Maximum output 1mW Wave length 633nm
AVOID EXPOSURE
LASER LIGHT IS EMITTED
FROM THIS APERTURE
V : 87
°
55'45"5
HR: 180
°
44'12"5
SD HD NEZ 0SET HOLD
P1
↓
P1
Depending on the country where the instrumetn is sold, either of these labels may be
found on the GPT-8000A/8000 series laser plummet type.
Symbol mark while the laser is emitting.
The following symbol mark willappear at the right side of the second line.
The symbol mark will blink while the laser
plummet is working.