manualshive.com logo in svg

Topcon GPT-8000 Series, Инструкция по эксплуатации

Поделиться
Скачать
Topcon GPT-8000 Series Скачать руководство пользователя страница 42

3 AUTOMATIC TRACKING / AUTOMATIC COLLIMATION (GPT-8000A series)

3-5

3.4 Setting Parameters for Auto-Tracking

A proper setting for each parameter are necessary for custom use.
The setting of the parameters can be done in the star key mode.

3.4.1 Setting Items

Items

Selecting item

Contents

SEARCH 
PAT TERN

PATTERN 1

The search range is the area to searched for the prism by rotating 
the telescope and body in searching.

PATTERN 2

SEARCH 
RANGE

V:0

°

 to 90

°

 

H:0

°

 to180

°

The search range is the area to searched for the prism by rotating 
the telescope and body in searching. The SEARCH range is 
decided from the point where the prism lost, and the values will be 
set to plus and minus directions in horizontal and vertical. Also it is 
enable to set each search pattern separately.

WAIT TIME

0:00 to1:00:00
(1sec. step)

The time the prism is lost before GPT-800 0A series starts the 
searching. If the mode is set to [HOLD], mode will not change to 
searching.

HOLD

TRACKING 
SPEED

SURVEY

Select your purpose.

MACHINE 
CONTROL

REFRECTOR
TYPE

PRISM

The type of the refrector can be selected.

REFRECTOR 
TA PE

1) Search Patterns

The search pattern is the rotating method of telescope and instrument to find the target prism in
search mode. Search pattern includes the following 2 ways that can be selected.

PATTERN 1

This pattern can be selected to search the prism at the point where the prism is lost.
Instrument searches in up down direction gradually from the point where the prism is lost.
The searching is arranged to 2 times until the prism is found.
The auto tracking mode changes to manual mode when the refrector could not found out 
within 2 times searching, and returns to the point where the refrector is lost.

PATTERN 2

This pattern can be selected to search for the prism. The search pattern tries to locate the 
prism in a very short time. 
The searching is arranged to 2 times until the refrector is found.
The auto tracking mode changes to manual mode when the refrector could not found out 
within 2 times searching, and returns to the point where the refrector is lost

1)

Things like heat haze might interfere with the tracking system in the long distance, near
limit of auto tracking range, in search mode.

2)

Reaction by rotating of instrument in search mode is serious. Be sure of each 
connection part of the tribrach or tripod are firmly.

Содержание GPT-8000 Series


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды