coordinates.
Example:
n003
PTP M
File: 3399
Lbl: 0
X
：
20.000
Y
：
-34.125
Z
：
12.320
Meaning: After completing the n002 line execution, then execute this line n003.
X/Y/Z will run with the most high speed set in the Sys Pars(System parameters). The
speed is the resultant speed. The motion action is the linear interpolation (start at the
same time, stop at the same time). Subject to the previous position, the X axis will
move 20.000 to the positive direction, the Y axis will move 34.125 to the negative
direction, the Z axis will move 12.320 to the positive direction. After completing the
execution, automatically execute the n004 line action.
2
）
Lin M(Linear motion): Run with the given F value speed of this line, in relative
coordinates. The Start speed≤the F value≤the axis high speed. When the input F value
is less than or equal to the start speed, the running speed is the start speed value.
When the input F value is greater than or equal to the axis high speed, the running
speed is the axis high speed value. The start speed(St HSpd(Start high speed)) and the
axis high speed are set in the Pars Set(Parameters settings)→Sys Pars(System
parameters)→Spd Pars(Speed parameters).
Example:
n006
Lin M
File: 3399