Usr Login OK
User login successfully
Pwd Err Pls Entr Agn Password mistake, please enter again
If the login is successful and pressing directly the Exit key on the controller
panel, then the Pars Set(Parameters settings) area can be edited. After the editing is
completed, you can re-enter the Usr Mgmt(User management), and select the Usr
Quit(User quit). After pressing the Cfm(Confirm) key, the current all contents of Pars
Set(Parameters settings) can not be changed. Also you may not choose to re-enter,
after power down, the status is 'User not logged in' automatically. If need to modify,
enter again the Usr Mgmt(User management) to login.
PrsCfmForUsrQuit Press the confirm key for user's quit
Usr Quit OK
User quit successfully
3.4.4.2
3.4.4.2
3.4.4.2
3.4.4.2 Mod
Mod
Mod
Mod Pwd(Modify
Pwd(Modify
Pwd(Modify
Pwd(Modify password)
password)
password)
password)
In the Usr Mgmt(User management) interface, press the left F2 key to enter the
Mod Pwd(Modify password) interface.
Through this setting, the old password of Usr Mgmt(User management) can be
modified and set to the password grasped by the user.
Note: If want to modify the parameters in the Pars Set(Parameters settings) area, you
need to login Usr Mgmt(User management), and then you can modify and save. Or