3.2.2
3.2.2
3.2.2
3.2.2 Jog
Jog
Jog
Jog Op(Jog
Op(Jog
Op(Jog
Op(Jog operation)
operation)
operation)
operation)
In the Man Op(Manual operation) interface, press the left F2 key to enter the Jog
Op(Jog operation) interface. At this time, the Jog Op(Jog operation) key color is
negative display, and the system is in the Jog operation state. The Jog increment
parameter is set in the CtrlPars(Control parameters) area of the Pars Set(Parameters
settings) area, and is the fixed mode.
Through the keys
（
‘←’‘→’‘↑’‘↓’‘-’‘.’
）
on the controller panel or the keys of
external IO settings, the forward or reverse rotation of the motor can be controlled
with the already set displacement increment.
3.2.3
3.2.3
3.2.3
3.2.3 BkTProg0(Back
BkTProg0(Back
BkTProg0(Back
BkTProg0(Back to
to
to
to program
program
program
program zero)
zero)
zero)
zero)
In the Man Op(Manual operation) interface, press the left F3 key to enter the
BkTProg0(Back to program zero) interface. At this time, the BkTProg0(Back to
program zero) key color is negative display, and the system is in the BkTProg0(Back
to program zero) state. The speed parameter is set in the Spd Pars(Speed
parameters) area of the Pars Set(Parameters settings) area, and is the resultant
speed of the system high speed. That is, returning back to the program coordinates
zero in linear interpolation (start at the same time, stop at the same time) mode. At
this time, only Pause is valid. After returning back to the coordinates zero, the key
color negative display is back to the normal status.