Topcnc TC5510 Скачать руководство пользователя страница 16

Страница: 16 / 72

Man HSpd(Manual high speed)

Jog Op(Jog operation)

BkTProg0(Back to program zero)

BkTMech0(Back to mechanical zero)

At this time, the default is Man LSpd(Manual low speed). The speed parameter

is set in the Spd Pars(Speed parameters) area of the Pars Set(Parameters settings)

area, and is the fixed mode(the rate key is valid ).

Through the keys

（

‘←’‘→’‘↑’‘↓’‘-’‘.’

）

on the controller panel or the direction

keys of external IO settings, the forward or reverse rotation of the motor can be

controlled.

3.2.1

3.2.1 Man

Man

Man HSpd(Manual

HSpd(Manual

HSpd(Manual high

high

high speed)

speed)

In the Man Op(Manual operation) interface, press the left F1 key to enter the

Man HSpd(Manual high speed) interface. At this time, the Man HSpd(Manual high

speed) key color is negative display, and the system is in the Manual high speed state.

The speed parameter is set in the Spd Pars(Speed parameters) area of the Pars

Set(Parameters settings) area, and is the fixed mode(the rate key is valid ).

Through the keys

（

‘←’‘→’‘↑’‘↓’‘-’‘.’

）

on the controller panel or the keys of external

IO settings, the forward or reverse rotation of the motor can be controlled.

Содержание TC5510









































































Результаты поиска

Содержание TC5510

Отзывы:

Topcnc TC5510, Руководство пользователя, Страница: 16 / 72

Результаты поиска

Содержание TC5510

Отзывы: