Topcnc TC5510 Скачать руководство пользователя страница 13

Страница: 13 / 72

parameters or entering password for user login, press the Cfm(Confirm) key to

determine to modify parameters or user login successfully.

Spc: Space. It is valid in the Ed Prog(Edit program) state or Pars Set(Parameters

settings) state and used to clear(delete) the value of the current cursor position.

St: Start. It is valid in the AutoExec(Automatically execute) state and used to start the

execution of the current program file.

Paus: Pause. It is valid in the AutoExec(Automatically execute) state and used to

pause the execution of the current program file.

3.1

3.1 AutoExec(Automatically

AutoExec(Automatically

AutoExec(Automatically execute)

execute)

(TC5530R is used as an example)

3.1.1

3.1.1 Actl

Actl

Actl Run(Actual

Run(Actual

Run(Actual running)

running)

In the main interface, press the left F1 key to enter the AutoExec(Automatically

execute) interface. At this time, the Actl Run(Actual running) key color is negative

display, and the system default is in the Actl Run(Actual running) state in the

program continuous running mode.

Actl Run (Actual running)

Mt Run(Empty running)

SS Mo (Single-step mode)

TrmtProg (Terminate program)

In this state, by pressing the St(Start) key on the controller panel or the external

input line St(Start) key defined in the IO set(IO settings) area of Pars Set (Parameters

Содержание TC5510









































































Результаты поиска

Содержание TC5510

Отзывы:

Topcnc TC5510, Руководство пользователя, Страница: 13 / 72

Результаты поиска

Содержание TC5510

Отзывы: