Toolex 597077, Инструкция по эксплуатации

Страница: 21 / 27

21 / 27
21
thermal overload, stop all use. Have
the welder inspected and repaired by
a qualified service technician.
6. Store the welder and accessories in a
clean and dry location.
7. Periodically disassemble and clean
the Torch Head components with steel
wool.
Replace burnt, cracked,
distorted, or coated components,
Refer to the assembly drawing on
page 11.
8. To gain access to the internal
components of the unit, remove
screws from Main Body Cover. The
home user is strongly advised not to
remove the tool covers and not to
attempt any electronic repairs. Any
repairs must be completed by a
qualified technician. Opening the tool
will void any warranties, and may
result in damage to equipment or
possible personal injury. Don’t do it.
9. On a daily basis check for any of the
following problems: If any are found,
take the tool to a qualified repair
technician.
a. Abnormal vibration, sound or
smell.
b. Abnormal heating at any cable
connection.
c. Then fan does not work properly.
d. Any switch or control does not
work properly.
e. Any damage to cables.
ASSEMBLY DIAGRAM
The structure of AC/DC TIG200
（
reference only):