Toolex 597077, Инструкция по эксплуатации

Страница: 16 / 27

16 / 27
16
AC/DC TIG 200 DC Welding
5. DC Ground Cable Connector;
6. TIG Control cable connector;
7. TIG Cable connector.
AC/DC TIG 200 AC TIG Welding
8. AC Ground Cable Connector;
9. TIG Control cable connector;
10. TIG Cable connector
DC TIG 200 MMA welding
11
．
Ground Cable Connector;
12
．
MMA Welding cable connector.
13. Ground Cable Connector;
14.
MMA Welding cable
connector.(The adaptor 15 should be
connected to 14 before plugging the
MMA welding plug.)
As the following picture show:
AC/DC TIG 200 MMA Welding
(As for this kind welder, MMA welding is
not recommended)
OPERATION
Note: Before beginning, please read
and
understand all the safety
precautions staring on page 1 and
especially the section “Specific Safety
Rules” starting on page 3.
1. Connect the TIG torch control, cable
plug, and gas outlet hose as shown on
page 9. Twist to lock in place.
2. Plug the cable of the Grounding
Clamp into the welder
（
showed on left
side of page9
）
and secure the clamp to
a clean, exposed metal part of the
workpiece.
8
9
10
11 12
1
3 1
4
1
5
1
5