Toolex 597077, Инструкция по эксплуатации

Страница: 15 / 27

15 / 27
15
example: GAS PRE-FLOW indicator
on, adjust “ADJUSTMENT PAR.” 6#
button to set “GAS PRE-FLOW/
GAS
POST-FLOW” time
（
3~0s/99.9-0s
）
; When the
“STARTING AMP.” indicator on, adjust
“ADJUSTMENT PAR 6#.” button to set
STARTING AMP. /FINAL AMP.
Current
（
315/270/250~/15A
）
; and
using the same way to adjust
beforehand
for the followings:
“CURRENT UP SLOPE/CURRENT
DOWN SLOPE” time
（
15~0S
）、
“TIG”
（
315/270/250~15A
） 、
“BASE
AMP./PEAK AMP.” current
（
315/270/250~/15A
）
/“PULSE
WIDTH ”
（
99%~1%
） 、
“AC”
（
100~20HZ
）
/“PULSE FREQ.”
（
500~0.2HZ(DC), 20~0.2HZ(AC)
）
;
“CLEAN WIDTH
（
+40~
-40%
）
”/“CLEAN SCOPE
（
30~ -15%
）
”
。
Long time pressing this button can
realize speediness adjustment. This
button
just can adjust these
parameters from high to low. Also it
can used for adjusting welding current
(from low to high) when the STICK is
used.
This welding machine can auto-save
data when it is power off, which could
be used directly of next time.
NOTE: Protection Code (May
showed on the digital display)
DISPLY 804: Machine auto-self
protection when it is over-heated
Display 805: Short circuit of the TIG
torch
TIG Torch Welding Connect
DC TIG 200 welding
1. Ground Cable Connector;
2. Gas Connector of the torch;
3. TIG Control cable connector;
4. TIG Cable connector.
1
2
3
4
5 6 7