General instruction
04
This appliance can be used exclusively by skilled professionals. Avoid the use of this appliance by children or
unqualified persons.
This machine shall be destined exclusively to the use it has been expressly designed for. Any other use shall be
considered ill-suited and improper. The manufacturer shall not be considered responsible for any damages cau-
sed by improper use.
Children shall be supervised and never allowed to play with the appliance.
Children shall be never allowed to clean or maintenance the appliance.
The electric safety of the machine is achieved only when the machine is correctly connected to a grounded electric
system.
The user shall arrange electric, water and draining systems in a suitable position to allow correct machine
installation.
The installer cannot modify the existing system built by the user.
If the electric supply cable is damaged, it must be replaced by another cable
provided by the manufacturer or by its Technical Service.
For good machine functioning and maintenance, it might be necessary to install a water softener in order to avoid
scale formation. This must be evaluated by the installer and the user shall leave a space for the correct installati-
on of a water softener, following the instructions contained in its manual.
The machine shall be placed on a surface guaranteeing secure support. The machine must be connected exclusi-
vely to an appropriate cold drinking water source, in compliance with national norms and rules.
The pressure of the incoming water must be between 0.138 MPa and 0.620 MPa. If this requirement is not met,
consult the manufacturer.
A shut-o tap must be installed between machine water hose and water system to block water flow in case of
necessity.
Do not use water jet devices in the area where TONE 02 is installed!
Do
NOT
tilt TONE 02 during operation! Max. tilt angle < 2°.
Only to be operated by trained personnel!
Содержание TOUCH 02
Страница 1: ...02 T O U C H 0 2 ORIGINAL INSTRUCTIONS ...
Страница 3: ...Dimensions 03 ...
Страница 28: ...TOUCH 02 Wiring 28 WIRING DIAGRAM ...