Tone TOUCH 02, Оригинальное руководство пользователя

Страница: 24 / 30

Appendix B - Condensed Operation
24
BREWING
Insert funnel with product to brew as applicable. Ensure empty dispenser in place below brew head.
Touch screen to wake brewer if necessary.
Select beverage type from choices.
Select brew volume from choices.
Press the brew button to immediately start brew cycle.
ENTER PROGRAMMING
Press the upper left hand corner of main beverage type selection screen. Enter password – (3650).
EDIT RECIPE
Enter programming (see ”ENTER PROGRAMMING”).
Select “Edit Recipes”.
Select recipe to be edited (use + or – on either scrolling wheel or summary “Recipe Settings” screen).
Select feature to be modified from summary screen: Temp, Volume, or Time.
Adjust feature parameters on detail screens. Push return to return to summary Recipe Settings screen.
Press return to go back to “Recipe Select” screen. Press return again to go back to the Programming/Service
menu.
Select finish when editing is completed. Press Finish again to return to the main/beverage select screen.
PERSONALIZE
Enter programming (see ”ENTER PROGRAMMING”).
Select “Personalize”.
User may edit phone number by selecting the phone number and using keypad and save function. The company
name may be edited using the L,R keys to select letter to be changed. Then use Up/Down keys to change letter.
Change between symbols and upper and lower case letters using key above the L and R keys.
Select other settings to turn on/off beeper or energy modes. A setback time may be programmed for energy sa-
ving options and Autoarm options may be activated or disabled. Metric or imperial measure may be selected here
also.
Password is non-changeable.
Press finish to go back to the Programming/Service menu. Press Finish again to return to the main screen.
CALIBRATE
Enter programming (see ”ENTER PROGRAMMING”).
Select “Calibrate”. Enter password – (3926).
Select item to be calibrated (greyed out items are not available for calibration. May not be installed or have been
turned off in “Brewer Parameters” section).
Countdown clock is displayed with current setting. Place container in place at outlet to be calibrated. Press start.
Measure volume. Adjust the programmed value if required. (Dependent on conditions, it may be advisable to run
multiple cycles and enter weighted average).
Press Finish. If no further items require calibration select Finish again to go back to the Programming/Service
menu. Press Finish again to return to the main/beverage select screen.