Tomey MR-6000, Инструкция по эксплуатации

Страница: 38 / 70

■ 3-8
 Peel off the top sheet of chin paper and clean the forehead pad
with a clean cloth before capturing images for the next patient.
Clean the forehead pad with a cloth dampened with ethanol for
disinfection as needed.
Have the patient place their chin on the chinrest. Adjust the chinrest height so that the
height of the corner of the eye is aligned with the eye level mark.
Press the
▲
button on the side of the joystick to raise the chinrest; or the
▼
button to
lower the chinrest.
When the patient's eye height is adjusted, lightly push the patient's forehead against the
forehead pad to secure the patient's position.
(4) Selecting an eye
Tap the eye selection button to move the head to the position of the patient’s eye.
(5) Fixation target instructions
Ask the patient to look at the fixation target.
(6) Alignment
 Do not allow any person to place their hands or fingers in the
clearance between the head and neck or neck and base, or the
section under the chinrest. Their hands or fingers may be caught
and injured.
 The Auto Alignment function may not work correctly when
eyelids and eyelashes cover the cornea. Ask the patient to open
their eyes wide or have the physician lightly hold the patient's
upper eyelid with their fingers.
 Auto Alignment may not work correctly when the patient blinks
frequently. Ask the patient to stop blinking while capturing
images.
 Ask the patient to look at the fixation target. If the patient looks in
a different direction or moves, alignment may not be conducted
correctly.

Auto Alignment is set as the standard setting to capture better
images. In some rare cases, auto alignment cannot be performed