40
vi.
Enter or select the parameters then hit "Send" to update CEM3-G-WF wrench settings
“Receive”: Confirm current settings on CEM3-G-WF wrench
The parameters on software display will be updated
“Initial Value”: The parameters on software display will be cleared
It does not update settings on CEM3-G-WF wrench
[Description of parameters]
CEM3-G-WF wrench settings
#1, IP Address:
Enter IP address for CEM3-G-WF wrench
#2, SubNet Mask:
Enter SubNet Mask for CEM3-G-WF wrench
#3, Default Gateway:
Enter Default Gateway for CEM3-G-WF wrench
#4, Communication Mode:
Select communication frequency
Access Point Settings
#1, SSID:
Enter SSID of access point (up to 32 digits)
#2, Security:
Select “WPA2” or “Open” depend on access point
#3, Encryption System:
Select “AES” or “NONE” depend on assess point
#4, Security Key:
Enter security key of access point to connect (up to 32 digits)
Connect to Server Settings
#1, IP Address:
Enter IP address for connecting server
#2, Port Number:
Enter port number for connecting server
(Available through 1024 to 65535)
