Toa N-CC1000 NTSC, Инструкция по эксплуатации, Страница: 62 / 72

4-16 N-CC1000/CC1110/VT1010 INSTRUCTION MANUAL (Applications)
CHAPTER 4. JetManager
9. Click the "OK" button to close the password setting window.
If the indication "User-Password" or "Service-Password" is displayed in the password column, the
configuration file can be uploaded.
10. To select the configuration file saved to the hard disk, click the "Browse" button for the upload file.
11. To select the directory of the file to save the log, click the "Browse" button for the log directory.
12. Check to confirm the contents entered in the "Configuration Upload" window, then click the "Upload"
button.
Uploading begins.
13. If uploading to the device is successful, click the "Clear Password" button.
If the password column is cleared, this indicates password protection status.
14. After uploading is correctly completed, click the "Close" button to close the "Configuration Upload"
window.
15. To operate devices with the new configuration file, turn the power off to disconnect those devices for a
while, then switch on again.
16. Click the "Scan" button in the toolbar to display all of the connected devices and their current properties.
Important
Uploading the configuration file overwrites the IP address values of the devices saved to the configuration file.
After uploading the configuration file, assign new, unique IP addresses to such devices, as required.