Toa N-CC1000 NTSC, Инструкция по эксплуатации, Страница: 17 / 72

N-CC1000/CC1110/VT1010 INSTRUCTION MANUAL (Applications) 2-9
CHAPTER 2. Operation With Internet Explorer
Camera Pan/Tile Operations
When pan/tilt operations are set to "One-Push"
Clicking the arrow button causes the pan/tilt drive to stop after operating the fixed amount. The amount of
movement can be changed in "Pan/Tilt Speed."
When pan/tilt operation is set to "Continuous Operation"
The pan/tilt drive continues to move while the arrow button is clicked ON. Movement stops when the arrow
button is clicked OFF.
Zoom/Focus Operations
Designated operations are performed while the "Telescope," "Wide Angle," "Far," or "Near" buttons are clicked
ON, and these operations stop when the button is clicked OFF. The "Auto" (Focus) button automatically
adjusts the focus when merely clicked.
Note: During Auto-Focus operation, subsequent operations cannot be performed for an interval of 5 seconds
after the button is clicked.
Moving the Preset Positions
1. Enter the preset position number to be moved with the 10-key numerical pad.
The number is displayed in the green box over the numerical pad.
To cancel the entered number, click the "C" key.
2. Click the "Set" button. The camera begins to change the preset position.
Activating and Resetting the Camera Menu
The camera menu alternately turns on and off as the "ON/OFF" key is clicked. If the ID number has been set,
it needs to be entered when activating the camera menu.
Control at the Keyboard
Control can also be performed at the PC keyboard as well by clicking buttons with the mouse.
The following table shows the relationship between available commands and their corresponding keys.
Note: Only valid when the control dialog box is situated in the front.
Arrow button
10-key button
Set
C (clear)
Zoom (telescope)
Zoom (wide angle)
Auto (focus)
Focus (far)
Focus (near)
Auto (start)
Auto (stop)
Control Dialog Button
Arrow key
10 numerical keys
Enter
Esc
T
W
A
F
N
S
E
Corresponding Key