TM RACING 4 Stroke 2009 Скачать руководство пользователя | Manualshive

Страница: 4 / 80

background image

ENGLISH

ENGLISH

4

Dear

Dear

Dear

Dear

Dear TM customer

TM customer

TM customer

TM customer

TM customer,,,,,

We would like to congratulate you for having chosen a TM motorcycle.

Your TM is a competitive and modern motorcycle that will surely give you a lot of satisfaction if you treat it
according to the provisions contained in this manual. Before starting up your TM motorcycle for the first time,
you must read this manual carefully so as to understand the regulations for use and the features of your
new motorcycle.
Only in this way will you know how to adjust the motor cycle, and to adapt it in the best way possible to
your personal characteristics and how to protect yourself from injury. This manual also contains important
information regarding the maintenance of your new motorcycle.
This manual is based on the most recent information concerning the product that was available on going to print.
Further variations owing to succesive constructive developments of the motorcycle are however possible.
This manual is an integral part of the motorcycle, it must be given to the customer at the time of purchase and must
remain with the motor cycle whenever it is re-sold.

Please note that the operations marked with (A) in the “Frame and Engine Maintenance” chapter must be carried
out by a TM.specialised workshop. If these maintenance operations should be necessary during competitions,
they must be carried out by a qualified mechanic.

For your safety, only use TM original spare parts and accessories.
TM does not assume any responsibility for the use of other products and for damage deriving from them.

We advise you to respect the running in period, inspection periods and established maintenance periods scrupulously.
Only full compliance with these regulations will lengthen the life of your motorcycle. Overhauls and repairs must
only be carried out by a specialised TM workshop.
For any information or requests contact a specialised TM workshop, which is backed by the TM importer.
Please remember that a lot of technical data and information regarding TM motorcycles is available at: www.tmracing.it.

Motorcycling is a marvellous sport that you will be able to enjoy with your TM motorcycle.
Always remember to respect the environment and other people. Always use the motorcycle with caution, it is in
everybodys interest to safeguard the future of our sport.

Enjoy yourself with your TM motorcycle!

TM RACING S.p.A.

Via Fano 6 - 61100 PESARO

ITALY

TM RESERVES THE RIGHT TO CHANGE OR TO EXECUTE MODIFICATIONS AS IT DEEMS NECESSARY .

«
...
2
3
4
5
6
...
»

Содержание 4 Stroke 2009

















































































Отзывы:

Нет отзывов

Похожие инструкции для 4 Stroke 2009

Бренд: Öhlins Страницы: 2

Mechatronics 35007-01

Бренд: Öhlins Страницы: 4

McPherson Strut MIR 5H02

Бренд: Öhlins Страницы: 2

Бренд: Öhlins Страницы: 4

Бренд: hepco & becker Страницы: 4

Бренд: R&G Страницы: 14

Бренд: Honda Страницы: 3

Бренд: Kabuto Страницы: 6

Dirt rocket XM500

Бренд: X-TREME scooter Страницы: 14

Бренд: Ice Bear Страницы: 64

Бренд: DYNATEK Страницы: 4

1003007FONTANASPRINT

Бренд: DYNATEK Страницы: 7

Бренд: Aim Страницы: 5

Бренд: hepco & becker Страницы: 3

Бренд: Yamaha Страницы: 93

Бренд: Yamaha Страницы: 114

Бренд: Yamaha Страницы: 100

Бренд: Yamaha Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды