manualshive.com logo in svg

TM RACING 4 Stroke 2009, Руководство пользователя и по обслуживанию

Поделиться
Скачать
TM RACING 4 Stroke 2009 Скачать руководство пользователя страница 51

ENGLISH

ENGLISH

ENGLISH

51

TYRES, TYRE PRESSURE

TYRES, TYRE PRESSURE

TYRES, TYRE PRESSURE

TYRES, TYRE PRESSURE

TYRES, TYRE PRESSURE

The type, the state and the pressure of the tyres condition the
motorcycle’s behaviour on the road and they must be checked before
every journey.
- The dimension of the tyres is indicated in the technical data and in

the registration paper.

- The state of the tyres must be controlled before every journey.

Check the tyres by verifying that they are not cut, have nails or other
sharp objects pushed into them.
Regarding the minimum depth of the profile, respect the regulations
in force in your country. We recommend that the tyres are changed at
the latest, when the profile has reached a depth of 2 mm.

- The tyre air pressure must be checked regularly when the tyres are

“cold”. Correct adjustment of the pressure guarantees optimal
comfort when travelling and maximum duration of the tyre.

- HAVE EXCLUSIVELY TYRES OF APPROVED TYPE AND DIMENSIONS

MOUNTED ON YOUR VEHICLE AND HOWEVER ESTABLISHED BY TM.
DIFFERENT TYRES CAN NEGATIVELY CONDITION THE BEHAVIOUR OF
THE MOTORCYCLE ON THE ROAD AND BE THE CAUSE OF FINES
ENVISIONED BY THE REGULATIONS IN FORCE IN YOUR COUNTRY .

- TO GUARANTEE YOUR SAFETY AND THAT OF OTHERS, DAMAGED TYRES

MUST BE REPLACED IMMEDIATELY.

- EXCESSIVELY WORN TYRES NEGATIVELY CONDITION THE BEHAVIOUR

OF THE MOTORCYCLE, MOST OF ALL ON WET SURFACES.

- INCORRECT PRESSURE LEADS TO ANOMALOUS WEAR AND

OVERHEATING OF THE TYRE.

CHECK ADJUSTMENT OF MAGNETIC SENSOR

CHECK ADJUSTMENT OF MAGNETIC SENSOR

CHECK ADJUSTMENT OF MAGNETIC SENSOR

CHECK ADJUSTMENT OF MAGNETIC SENSOR

CHECK ADJUSTMENT OF MAGNETIC SENSOR

FOR 

FOR 

FOR 

FOR 

FOR  T

T

T

T

TA

A

A

A

ACHOMETER (A)

CHOMETER (A)

CHOMETER (A)

CHOMETER (A)

CHOMETER (A)

In all the versions the magnetic sensor is located on the rear wheel.

END/SMR - The distance between the head of the screws (2) and the
sensor (1) must be 2-4mm. If not, the tachometer may not work
properly. The distance of the sensor is adjusted by the shim (3). Do not
remove it, otherwise the sensor may hit the screws and get damaged.

SMM - The distance between the brake disc side face (4) and the
sensor (1) must be 2-4mm. If not, the tachometer may not work properly.
The distance is adjusted by the shim (3). Do not remove it, otherwise
the sensor may hit the disc side face (4) and get damaged.

BA

BA

BA

BA

BATTERY (END/MX/SMR/SMM/SMX)

TTERY (END/MX/SMR/SMM/SMX)

TTERY (END/MX/SMR/SMM/SMX)

TTERY (END/MX/SMR/SMM/SMX)

TTERY (END/MX/SMR/SMM/SMX)

(ALL MODELS WITH E.S.)

(ALL MODELS WITH E.S.)

(ALL MODELS WITH E.S.)

(ALL MODELS WITH E.S.)

(ALL MODELS WITH E.S.)

The saddle must be removed to access the battery.
The battery does not require maintenance.
It is not necessary to check the level of the electrolyte or top-up with
water.
The battery poles only must be cleaned and, if necessary, slightly
greased  using grease that does not contain acids.
Battery disassembly:
First remove the negative pole and then the positive pole from the
battery.
Disconnect the elastic stripes (5).
Remove the battery.
When assembling the battery, place it with the poles pointing back-
wards (see figure), first connect the positive pole and then the nega-
tive pole to the battery.

DANGER

FRAME AND ENGINE MAINTENANCE

FRAME AND ENGINE MAINTENANCE

FRAME AND ENGINE MAINTENANCE

FRAME AND ENGINE MAINTENANCE

FRAME AND ENGINE MAINTENANCE

FRAME AND ENGINE MAINTENANCE

FRAME AND ENGINE MAINTENANCE

FRAME AND ENGINE MAINTENANCE

FRAME AND ENGINE MAINTENANCE

FRAME AND ENGINE MAINTENANCE

TYRE PRESSURE

TYRE PRESSURE

TYRE PRESSURE

TYRE PRESSURE

TYRE PRESSURE

TYRE PRESSURE

TYRE PRESSURE

TYRE PRESSURE

TYRE PRESSURE

TYRE PRESSURE

FRONT

FRONT

FRONT

FRONT

FRONT

REAR

REAR

REAR

REAR

REAR

Off-road

Road, rider only

1.1 bar

1.7 bar

1.1 bar

1.7 bar

1

3

4

1

2

3

5

END/SMR

SMM

Содержание 4 Stroke 2009

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды