TM RACING 4 Stroke 2009, Руководство пользователя и по обслуживанию

Страница: 12 / 80

ENGLISH
ENGLISH
12
COMBIN COMBIN COMBIN COMBIN COMBINA A A A ATION SWIT TION SWIT TION SWIT TION SWIT TION SWITCH CH CH CH CH
(END/SMR/SMM) (END/SMR/SMM) (END/SMR/SMM) (END/SMR/SMM) (END/SMR/SMM)
This command (1) is located near the handlebar left grip.
The use of the switch is very easy.
When the symbol (3) on the rotating ring is aligned with the symbol (4)
on the switch body, lights are switched off.
To switch the lights on, turn the ring (2) counterclockwise until the
symbol (5) is aligned with the symbol (4).
Operate in the same way to switch on the low beam (7) and the high
beam (6).
Press the button (8) to activate the horn.
Press the rocker switch (9) on the left to activate the left hand indicator
and on the right to activate the right hand indicator.
ST ST ST ST STAR AR AR AR ART COMMAND T COMMAND T COMMAND T COMMAND T COMMAND AND EMER AND EMER AND EMER AND EMER AND EMERGENCY ST GENCY ST GENCY ST GENCY ST GENCY STOP OP OP OP OP
(END/MXE.S./SMXE.S./SMR/SMM) (END/MXE.S./SMXE.S./SMR/SMM) (END/MXE.S./SMXE.S./SMR/SMM) (END/MXE.S./SMXE.S./SMR/SMM) (END/MXE.S./SMXE.S./SMR/SMM)
In the models with battery and electric ignition, a two-button command
is found at the side of the throttle command, one button is red, the other
black.
The red button (1) has two positions. Positioned inwards, it interrupts
contact with the battery, removing the current from all services
consumers/ancilleries. The engine will not start even with the pedal.
On these models, position it like this to switch the
engine off.
It is advised to leave it like this until the engine is started-up again,
otherwise the battery will go flat.
Positioned outwards, it closes the contact with the battery,
enables the use of all services, including electric starter.
For this reason, never leave it like this with the engine
switched off, otherwise the ignition control unit, which
absorbs current even when the engine is switched off,
can make the battery flat.
The black button (2) activates the starter. Press to start-
up the engine and release once running.
Activate this command for a maximum of 8/10 sec. at a
time and wait a few seconds before re-trying.
Do not insist for more than 3/4 times: look for the probable
fault.
Never press this button when the engine is running.
OPERA OPERA
OPERA OPERA OPERATING CONTR
TING CONTR
TING CONTR TING CONTR TING CONTROLS
OLS
OLS OLS OLS
OPERA OPERA
OPERA OPERA
OPERATING CONTR TING CONTR
TING CONTR TING CONTR
TING CONTROLS OLS
OLS OLS
OLS
2
1