172-65639M-01 (EF200) 13 Apr 2018
15
3.5 Mounting the Transmitter (Remote Version)
Where the flowmeter body is installed on piping in a high position or in cases
where there is poor accessibility to the display, the remote transmitter display
may be installed in an easily visible location.
The transmitter can be mounted in the following ways:
•
Wall mounting (Fig. 10.A)
•
Pipe mounting (with optional pipe mounting kit) (Fig. 10.B)
Caution!
Install the transmitter in a location out of direct sunlight and with an ambient
temperature range of -40 to +80 °C. (See 3.7)
However, the display performance of the LCD may be affected or it may be
difficult to read the display if the ambient temperature is below -10°C or above
+60°C.
A: Wall Mounting
B: Pipe Mounting
Unit: mm
Caution!
Take care not to overtighten the nuts when installing the remote transmitter on
piping.
The transmitter housing is constructed from die-cast aluminum, therefore may
be damaged. (Recommended torque: 5 N
⋅
m)
M8
19
80
80
∅
8
.6
∅
20 – 70
Pipe Mounting Kit
(optional)
Caution!
Figure 10
Mounting the transmitter
(remote version)
Caution!
