TK TW45C, Руководство по эксплуатации

Страница: 79 / 148

Commissioning
Work steps
79
TK Elevator
BA, TW45C | 6231003860 | 06/2022
8 Commissioning
8.1 Work steps
Check the following points:
1. Check the machine, traction sheave and base frame.
2. Check the rope guard.
3. Check the distance to the traction sheave.
4. Check the setup of the machine, base frame, pedestal and rope depar-
ture.
5. With a side or oblique rope departure, secure the gear housing against
moving with steady plates and set screws.
6. Tighten the bolts with the required torque
Chap. 10.1
,
P.
83
.
7. Check the oil level.
8. Check the installation of filling and/or ventilation screw.
9. Check the power connections and grounding at the motor.
10. Check the connection of the coils and microswitch of the brake.
11. Check the connection values (voltage, frequency) against the manufac-
turer specifications.
12. Check the function of the monitoring devices (encoder, thermal element).
13. Check the parking brake and emergency brake NBS (if present).
14. Check the brake function.
15. Attach the direction arrow (Up/Down) according to the direction of travel
and clearly visible on the motor near the handwinding wheel.
16. Remove safety, auxiliary and installation tools from the danger zone.
i
For assembly and repair, use only original parts from thyssenkrupp Aufzug-
swerke GmbH, as otherwise no warranty can be provided.
8.2 Emergency operation
Rescue operation to rescue trapped persons
CAUTION
Rapid movement of the elevator car!
Abrasion injuries.
Only use the handwinding wheel for assembly and maintenance pur-
poses with a safe stance.
In the event of uncontrolled elevator car movement, let go of the hand-
winding wheel immediately.