TK TW45C, Руководство по эксплуатации

Страница: 28 / 148

28
Description
Product
TK Elevator
BA, TW45C | 6231003860 | 06/2022
Ite
m
Designation Ite
m
Designation
1
TW45B M SR machine base
frame
2
Rope holder complying with
EN81-77 for rope pulley diameter
D360
3 Rope pulley diameter D360 4
Rope holder complying with
EN81-77 for rope pulley diameter
D450
5 Rope pulley diameter D450
The safeguard measures also consist of shift protection devices that prevent
the machine from changing its position.
Fig. 17
ATR_2_12_0157_0
Item Designation Item Designation
1
TW45B M SR machine base
frame
2
Shift protection complying with
EN81-77
3.3.4 Encoder
The following hollow shaft encoders are available:
Number of pulses Version Connection
2x1024 TTL Line and connector hard-wired
2x4096 TTL
2x1024 HTL
Line stripped of insulation and wire
end sleeves attached
2x1024 Sine-cosine
Line stripped of insulation and
push-in sleeves attached.
3.3.5 Motor versions
Frequency-controlled three-phase motors made by CEG and EMOD are used
(for ISIS1). The mechanical layout (design IMB5/V1, flange A250, AS/BS shaft
ends, encoder mounting etc.) is executed in accordance with building code BV
6531- 07 Sheet 1 and/or the dimension sheets of CEG and EMOD.
In extension of the building code, the motors are modified and receive a larger
terminal box with the possibility to connect the connection lines of the opera-
tional brake (type Mayr RSZ 125) to a terminal block. For connection of the
brake (coil and microswitch) on the installation side, 2 M16x1.5 cable glands
are available on the motor terminal box.
Related to the motor shaft, mounting and thus the location of the motor con-
nection box is possible under 4x90°.
In the case of the ISIS1 version, the position of the motor terminal box is gen-
erally at the side opposite the traction sheave.
The specified electrical data apply to the following site conditions: