TK TW45C Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 148

background image

10

Safety

Warranty and liability

TK Elevator

BA, TW45C | 6231003860 | 06/2022

– Failure of the inverter (due to short circuit with triggering of the fuse)

▪

The elevator installation must be fitted with a safety device complying
with EN81 or A17 that detects exiting the elevator car with the door
opened and initiates suitable measures.

2.3

Warranty and liability

The "General Terms of Sale and Delivery" of TK Aufzugswerke GmbH apply.

Warranty and liability claims in the event of personal injury and material dam-
age shall be excluded if they arise due to at least one of the following causes:

▪

Improper use that is not in line with the intended purpose of the product

▪

Incorrect installation, commissioning, operation and maintenance of the
product

▪

Operation of the product with defective or inoperative safety and/or pro-
tection devices

▪

Non-observance of the instructions in the operating manual with regard to
transport, storage, installation, commissioning, operation and mainten-
ance

▪

Structural modification to the product without agreement or approval

▪

Modification to product features without agreement or approval

▪

Inadequate monitoring of parts that are subject to wear

▪

Repairs that are carried out improperly

▪

Cases of catastrophe due to third-party interference or force majeure

▪

Use of non-approved auxiliary materials and operating fluids

2.3.1

Structural modification of the product

The product is configured in the factory and delivered ready for operation.

If changes are made to the product, the entire warranty of TK Aufzugswerke
GmbH shall become null and void.

2.3.2

Use in line with intended use

The product has been constructed using state-of-the-art technology and in
line with the recognised technical safety regulations. It may only be used in
accordance with its intended use and when the technical safety devices are
free from defects. Any other or additional form of use shall be regarded as
non-compliant with the intended use. TK Aufzugswerke GmbH shall not be li-
able for any damage arising from such use or for any damage arising due to
operator errors.

In order to comply with the intended use of the product:

▪

Use the product as a Drive of elevators only

▪

Read and comply with the document, in particular the chapter entitled
"Safety", together with the warnings and all other applicable documents

▪

Comply with the commissioning instructions, the installation description
as well as the required inspection and maintenance work

«
...
8
9
10
11
12
...
»

Содержание TW45C





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для TW45C

Бренд: MULTIQUIP Страницы: 42

Mikasa MTX70HDR

Бренд: MULTIQUIP Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды