TK TW45C, Руководство по эксплуатации

Страница: 32 / 148

32
Description
Product
TK Elevator
BA, TW45C | 6231003860 | 06/2022
▪
Actual-value sensor; version WDG100-38-1024 TTL as standard
▪
Traction sheave dia. 360/5x8; (groove type S85°)
▪
without handwinding wheel
▪
without components for rope guard (part of machine base frame)
Version for machine location in the shaft pit for Ecolift, Simpakt
The version of the machine for use in the shaft pit consists of the compon-
ents:
▪
Driving gear (including oil filling) with foot mounting surface and motor
position vertical or horizontal (e.g. Ecolift) or with flange mounting surface
and motor position horizontal (e.g. with Simpakt)
▪
Gear ratio 32:1 or 40:3; version 32:1 on installations with rope suspension
1:1 (e.g. for Ecolift); version 40:3 on installations with rope suspension 2:1
(e.g. for Simpakt).
▪
Operational brake type Warner SZ50 50-2x50 Nm with separate elec-
trical-release brake circuits and 6 m cable length; optional with brake re-
lease levers for manual release (e.g. for Simpakt)
▪
Motor in version EME (CEG) MT132 (5.2 kW) or EME (CEG) MT132 (7
kW); mounting with terminal box location at top (e.g. for Ecolift,
Chap. 3.3
,
P.
13
) or at side (e.g. for Simpakt)
▪
Actual-value sensor; version WDG100-38-1024 TTL as standard
▪
Traction sheave dia. 440 as standard; dia. 520, dia. 590 and dia. 360 pos-
sible as options
▪
without handwinding wheel (e.g. for Ecolift); optionally with handwinding
wheel (e.g. for Simpakt)
▪
Components for the rope guard suitable for arrangement of the machine
in the shaft pit with rope departure direction vertically upwards (a = 180°)
for traction sheave dia. 440 (e.g. for Ecolift)
Version with earthquake safeguard complying with EN81-77
The optional version of the rope guard complying with EN81-77 enables com-
pliance with the requirements for protection devices in earthquake regions up
to earthquake category 1 as standard.
The rope guard fitted as standard is replaced with the modified rope guard
which, in the event of an earthquake, prevents the ropes from leaving the
groove of the traction sheave. Attention should be paid to ensuring that the
rope guard is installed in accordance with the installation instructions.
The rope holder complying with EN81-77 is standardised for traction sheaves
dia. 360 / 440 / 520 / 590, but not for traction sheave dia. 320.
The rope guard is designed in such a way that all standard gaps between the
ropes on the rope departure can be covered with the TW45B O SR and
TW45B M SR base frames.